In this article, we’ll be looking at each of these vintage modified stratocaster in detail. This website collects data from 60550 different reviews to give you an idea of which vintage modified stratocaster is really the best. We’ll discuss their features, prices, and other important information to help you decide which one is right for you. So without any further delay, let’s take a look at the best vintage modified stratocaster in 2024.
Top-rated Vintage Modified Stratocaster Comparison 2024
- Three vintage-style ‘60s Strat single-coil pickups
- “Mid ’60s C”-shaped Maple neck; 7. 25”-Radius Fingerboard with 21 vintage-style Frets
- Alder Body
- S1 switch adds neck pickup to positions 1 & 2
- Includes deluxe Gig Bag
- Polysol coated magnet wire
- Staggered non-beveled polepieces for string-to-string balance
- Alnico 5 magnets for greater focus and enhanced dynamics
- Installation hardware included
- Vintage noiseless pickups
- Polysol-coated magnet wire
- Staggered hand-beveled pole pieces for smooth, balanced tone
- Alnico 2 magnets create complex harmonics with warmer attack and less-aggressive midrange
- Vintage single-coil Strat tone without the hum
- Formvar-coated magnet wire
- Staggered pole pieces for balanced output
- Reverse-wound/reverse-polarity middle pickup to eliminate hum
- Beveled alnico 5 magnets for more focus and dynamics
- Wound and calibrated for each position
- Kluson Revolution 19:1 'Gibson' mount Locking tuners in Nickel with Pearloid Keystone buttons, Vintage style KEDPL-3801N
- Drop-in upgrade for instruments with Gibson style 2 hole mount and modern 25/64" or 10 mm) peghead hole. These normally use a screw in hex head bushing rather than a press in bushing.
- Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit tuners with a screw-in hex head bushing, traditional Kluson two-screw mounting pattern and modern 25/64" peghole. The vintage outline, pearloid keystone button and pin-stripes pay tribute to Kluson heritage while adding a rear knob locking
- SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging.
- Kluson (Publisher)
- Enamel-coated magnet wire
- Staggered pole pieces for balanced output
- Reverse-wound/reverse-polarity middle pickup to eliminate hum
- Non beveled alnico 5 magnets for more focus and dynamics
- Wound and calibrated for each position
- Basswood body finished in Olympic White
- Thick “V” maple neck with 9.5” radius maple board
- Vintage-voiced pickups
- Push-pull pot on tone 2 adds neck pickup to switch positions 1 and 2
- 6-point synchronized tremolo with bent steel saddles and vintage-style locking tuners
- Nickel-plated steel vintage-style bridge assembly with six bent "Fender" stamped saddles
- Assembly includes saddles, intonation screws/springs, and saddle height adjustment screws
- Tremolo block will accept standard 10/32 thread tremolo arm
- Assembly features 2-1/16" bridge mounting spacing
- Used on most Standard Series, Deluxe Roadhouse/Lonestar, and Blacktop Series Stratocaster models (Mexico) manufactured '06-Present
- Genuine Fender replacement accessory kit
- Includes vintage white tone and volume knobs, pickup covers, tremolo arm tip and switch tip (back plate sold separately)
- Used on American Vintage '59 and '65 Stratocaster guitars
- Fits most vintage and modern Stratocaster guitars
- Pickup covers will not fit N3 Noiseless or SCN pickups
- Basswood body finished in 2-tone sunburst
- Thick “V” maple neck with 9.5” radius maple board and medium jumbo frets
- Vintage-voiced pickups
- 6-point synchronized tremolo with bent steel saddles and vintage-style locking tuners
- Push-pull pot on tone 2 coil-splits humbucker
- [Sonic Characteristics] Single coil tone without the hum! Vintage Noiseless Strat pickups produce the brilliant clarity, definition and harmonic attributes of a vintage Strat in a noiseless package.
- [Construction] These pickups feature special beveled edge Alnico 5 magnets and enamel-coated magnet wire. Each Vintage Noiseless Strat pickup comes with 3 pots, a capacitor and resistor to enhance your Noiseless experience.
- DC Resistance: 9.8K, Inductance: 3.0 Henries
- Single coil tone without the hum! Vintage Noiseless Strat pickups produce the brilliant clarity, definition and harmonic attributes
- These pickups feature special beveled edge Alnico 5 magnets and enamel-coated magnet wire.
- For assembling vintage Strat tremolo system
- Introduced on "54 Stratocaster guitar
- Fits most vintage and modern Stratocaster guitars equipped with tremolo bridges
- Includes tremolo springs, tremolo claw and tremolo claw mounting screws
- Fits for most modern Squier Strat or Mexican Fender Stratocaster or American Standard Series with 6 mounting screws style ST tremolo bridge. It also fit many import ST style guitar, but may NOT fit a USA vintage Strat, measure it before you buy
- String spacing:10.5x5= 52.5mm (2-1/16 inch) ; 6 mounting screws spacing: 52.5mm (2-1/16 inch)
- Push-in 5mm tremolo arm, easy to install. Vintage style bent saddles and correct color combination will dress up your Squier/Fender guitar. Keep your guitar stays in tune
- Full short 36mm depth steel Tremolo block, 13mm thickness, correct size will fit Squier thin body(like Standard, Affinity, Bullet, Player, Contermporary,Classic Vibe, Vintage Modified series etc) and thick body, easy to replace. We will sell 40mm depth tremolo block separately
- Package included: 1 set Tremolo bridge and mounting accessories
- Enamel-coated magnet wire delivers warm vintage-style tones
- Alnico 5 magnets add more focus and enhanced dynamics
- Staggered polepieces balance volume and output across every string
- Wax-potted
- Period-correct cloth wire and fiber bobbin construction
- Fender Star caster saddles
- Package contains 6 saddles
- Satin chrome finish
- Country of Origin: UNITED STATES
- Model Number: 0992049200
- Item Weight: 1.0 lbs
- musical instruments and parts and accessories
- Fits for most modern Squier Strat or Mexico Fender Stratocaster with 6 mounting screws style ST tremolo bridge, also it is compatible with many MIJ(made in Japan) Strat style guitars
- String spacing:10.8x5= 54mm (2-1/8 inch) ; 6 mounting screws spacing: 54mm (2-1/8 inch), This size will work both 52.5mm and 54mm string spacing
- Push-in tremolo arm, easy to install. Vintage style bent saddles and correct color combination will dress up your Squier/Fender guitar
- Full short block, 13mm thickness, 36mm depth, correct size will fit Squier thin body(like Standard, Affinity, Bullet, Player, Contermporary,Classic Vibe, Vintage Modified series etc) and thick body, easy to replace. We will sell 40mm depth block separately
- Package included: 1 set tremolo bridge and mounting accessories
- Fits most modern Squier Strat or Mexico Fender Stratocaster or American Standard Series with 6 mounting screws style ST tremolo bridge. It also fit many import ST style guitar, but may NOT fit a USA vintage Strat, measure it before you buy
- Genuine Wilkinson parts. Six 10.5mm wide vintage style saddles, 52.5mm (2-1/16 inch) string spacing; 6 mounting screws, 52.5mm (2-1/16 inch) screws spacing
- Full short block, 13mm thickness, 36mm depth, correct size will fit Squier thin body(like Standard, Affinity, Bullet, Player, Contermporary,Classic Vibe, Vintage Modified series etc) and thick body, easy to replace. We will sell 40mm depth block separately
- Pop-in whammy bar arm, easy to push in. Vintage style bent saddles and correct color combination will dress up your Squier/Fender guitar
- Includes full bridge set and mounting accessories. Ready to use
- Gold-plated steel vintage-style bridge assembly with six bent "Fender" stamped saddles
- Assembly includes saddles, intonation screws/springs, and saddle height adjustment screws
- Assembly features 2-3/32" string spacing
- Fits most Standard Series models (Mexico) manufactured prior to 2006
- Does not include mounting hardware, tremolo claw, tremolo springs or tremolo arm
- Traditional covered stamped guitar tuning machines
- "Fender" stamped on back of each tuning machine
- Includes all mounting hardware
- Used on vintage Stratocaster and Telecaster guitars
- Fits most vintage and modern Stratocaster and Telecaster guitar; will not fit American Standard and American Deluxe models
With so many choices, making the right decision on a vintage modified stratocaster can be tough. But our reviews are here to assist you in your search for vintage modified stratocaster perfect! If we’ve been able to help simplify things, then consider spreading some love and sharing this article – it’ll give us that extra bit of motivation as we continue striving towards reviewing all products out there!