In this article, we’ll be looking at each of these squier jagmaster pickguard in detail. This website collects data from 69208 different reviews to give you an idea of which squier jagmaster pickguard is really the best. We’ll discuss their features, prices, and other important information to help you decide which one is right for you. So without any further delay, let’s take a look at the best squier jagmaster pickguard in 2024.
Top-rated Squier Jagmaster Pickguard Comparison 2024
- Fits Squier Mustang HH style electric guitar, like Bullet series. If you use it for other Mustang style guitar, you may need a modification for line up
- 9 mounting screw holes and round corner HH pickup routing (Humbucker-Humbucker)
- Plastic made, 2.0-2.2mm (0.08-0.09 inch) thickness
- Pure aluminum foil shielding on the back switch position and double layers protective films on the front
- Package included: 1 piece guitar pickguard
- Fits US/Mexico Standard Fender Strat or Squier Strat like Affinity series etc, good replacement or upgrade option
- 11-Holes standard SSS strat style pickguard, large back shielding
- Standard single-coil pickups, ceramic magnet, wax potted, output: 5.7K ohm for neck and middle, 6.0K ohm for bridge
- Installed standard strat style knobs, switch, pickups and pre-wired circuit, included pickguard screws
- Please check the wiring map in our product images. White wire is hot, any black wire can be the ground, then other black wire is for output jack's negative electrode
- Fits American Precision Bass, American Standard and Mexico Standard models (after 1970s). Will not fit Squier, 5-string Precision Bass
- 13 mounting screw holes, without truss rod notch. No holes for thumb rest or pickup cover.
- 4ply Red Tortoise/White/Black/White PVC material, 0.09 inch (2.2mm) thickness
- Back foiled, Double layers protective film on top, please remove it after you install
- Package included: 1 x Bass Pickguard
- The guitar pickguard is compatible with squier mustang bullet series HH style electric guitar. If you want to fit other guitar models, you may need modification for this pickguard.
- The guitar pickguard construction made of quality plastic material,rugged and easy to use. Pure aluminum foil shield on the backside, better shielding property and anti-interference.
- There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.
- Color: 3Ply Black,3Ply White,3Ply Cream,3Ply Mint Green,4Ply Black Pearl,4Ply White Pearl,4Ply Red Tortoise Shell(Optional);Easy to install.A good replacement part for broken or old one,anti-scratch to protect the guitar.
- There is different style to choosen from,please double check your screw-hole pattern to ensure you chose the right model.This product will give you a random color guitar pick!
- Fits US/Mexico Standard Fender Strat or Squier Strat like Affinity series etc, good replacement or upgrade option
- 11-Holes standard SSS strat style pickguard, large back shielding
- Dual hot rail single coil sized humbucker pickups, ceramic magnet, wax potted, 9K ohm high ouput
- Installed standard strat style knobs, switch, pickups and pre-wired circuit, included pickguard screws
- Please check the wiring map in our product images. White wire is hot, any black wire can be the ground, then other black wire is for output jack's negative electrode
- Fits Fender USA/Mexican Made Standard Stratocaster Modern Style.If you use it for other Strat style guitar, you may need a modification for line up.
- Pickguard: 11 screws holes, SSS style. 4ply Tortoise shell/White/Black/White PVC material,0.092 inch thickness
- Backplate: 6 screw holes. 4ply Celluloid Tortoise shell/White/Black/White PVC material,0.092 inch thickness
- Color: Tortoise Shell; Back foiled,double layers protect filmed on the top
- Package included: 1 x Pickguard;1 x Backplate
- Fits US/Mexico Standard Fender Strat or Squier Strat like Affinity series etc, good replacement or upgrade option
- 11-Holes standard HSS strat style pickguard, large back shielding
- Standard single-coil pickups, ceramic magnet, wax potted, output: 5.7K ohm for neck and middle, 12.5K ohm for bridge
- Installed standard strat style knobs, switch, pickups and pre-wired circuit, included pickguard screws
- Please check the wiring map in our product images. White wire is hot, any black wire can be the ground, then other black wire is for output jack's negative electrode
- 3ply PVC material made ,11-Holes standard SSS strat style pickguard. Fit to US/Mexican standard.
- Pre-wiring is complete with single coil pickup, 5-position pickup selector switch and with push/pull switch on a tone pot.
- The surface of the product is covered with a film to decrease scratches and damage, peel off after installation.
- Can be applied to ST Strat or diy electric guitar's parts, please pay attention to the specifications.
- Package includes: 1pcs strat pickguard, 10pcs pickguard screws.
- Pickups are ceramic magnets with flat top pole piece
- Resistance: Neck 5.5K 3.4H; Middle 5.5K 3.4H and Bridge 16K 9.6H
- Pickups Pole Spacing: Neck/Middle 50mm/50mm and Bridge 52mm
- Power mid-range sound loaded pickguard kit
- 11 screw holes in the side of pickguard, 3 single coil pickup holes were cut to fit American/Mexican Standard Fender Stratocaster.Back plate is as pictures shown.
- Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: aged pearloid / cream / black / cream.
- There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.
- PURE aluminum foil shield on the backside, better shielding property and anti-interference.
- Package includes: 1pcs strat pickguard, 1pcs guitar backplate, 25pcs pickguard screws.
- The Strat Pickguard Set fits USA/Mexican Standard Fender Strats,but not Fender Squier Strats or other types of Strats.If you have other types of strats,you may need to make a little modification to let it fit
- Made of plastic; The pickguard and trem cover have plastic films which should be peeled off after installing
- Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)
- Due to the wide variety of pickguards in the market,please be sure to verify the dimensions carefully before you order the item
- Free pickguard mounting screws are included
- This Strat HSS Pickguard Set fits USA/Mexican Standard Fender Strats,but not Fender Squier Strats or other types of Strats.If you have other types of strats,you may need to make a little modification to let it fit;Please note there are only 2 (not 3) mounting screw holes for the humbucker pickup
- Made of plastic; The pickguard and trem cover have plastic films which should be peeled off after installing
- Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)
- Due to the wide variety of pickguards in the market,please be sure to verify the dimensions carefully before you order the item
- Free pickguard mounting screws are included
- Ideal for Strat modern American Standard style, 11 mounting screw holes, SSS pickup routine, 3ply black/white/black PVC Material
- Neck 6.0K 4.0H, middle reverse wound 6.0K 4.0H, bridge 6.4K 4.5H. Pickup flat top pole, Alnico 5 magnet Pickups ;warm and brightness sound.
- A250K/B250 Pots, 1V2T, 5 ways switch, 223J capacitance
- Plastic knobs, switch tip and pickup covers, comes with pickguard screws, completely wired and ready to install
- Package included: 1pc Loaded guitar pickguard set
- SCOPE OF APPLICATION:fits USA/Mexican Standard Strat.
- HIGH QUALITY MATERIAL:Made of 3ply PVC material.
- PACKAGE INCLUDES: 3 single coil pickups with Ceramic magnet,2 tone & 1 volume knob, 5-way pickup switch & 1x Guitar Backplate & Included mounting screws.
- SATISFACTION GUARANTEE: We stand by our quality commitment and Please do not hesitate to contact us if there is any question. We will do our best to solve the problem as soon as possible.
- Fits American or Mexico Stratocaster Lonestar, Deluxe, Squier affinity series and other Strat guitar which has two mounting-screw holes for humbucking pickup. If you want to fit other guitar models, you may need to modificate this pickguard
- 2 single coils and 1 bridge humbucker routine. Humbucker slot is radius corner shape, so you do not need a pickup ring for this pickguard, will fit most open pickups
- 11 mounting-screw holes, 2 mounting-screw holes for humbucking pickup
- Plastic made, 2.0-2.2mm (0.08-0.09 inch) thickness
- Double layers protective films on the top, Large back shielding
- Fits most American/USA made vintage 65 or 60s and modern Jaguar guitars. If you want to fit other guitar models, you may need to modificate this pickguard
- 10 mounting-screw holes, Notched design for easy truss rod access
- Plastic made, 2.0-2.2mm (0.08-0.09 inch) thickness
- Double layers protective films on the top
- Package Included: 1 Pc Guitar Pickguard
- Fits Fender USA/Mexican Made Standard Stratocaster Modern Style. If you use it for other Strat style guitar, you may need a modification for line up
- 11 mounting screws holes, HH (2 humbuckers) pickup routine
- 3Ply plastic material, 2.0-2.2mm (0.08-0.09 inch) thickness
- Double layers protective film on the top, please remove it after you install
- Package Included: 1Pc Pickguard
- The package length of the product is 14.9999999847 inches
- The package width of the product is 9.49999999031 inches
- The package height of the product is 0.99999999898 inches
- Country of origin is United States
- Fits most American/USA made vintage 65 or 60s and modern Jazzmaster guitars. If you want to fit other guitar models, you may need to modificate this pickguard
- 13 mounting-screw holes, Notched design for easy truss rod access
- Plastic made, 2.0-2.2mm (0.08-0.09 inch) thickness. Double layers protective films on the top
- No back shielding for current version
- Package Included: 1 Pc Guitar Pickguard
- Fits US/Mexico Made Fender Standard Telecaster Modern Style.If you use it for other Tele style guitar, you may need a modification for line up.
- 8 screw holes and 2 screw holes for neck pickup
- Single ply Black plastic material,0.082 inch thickness
- Black, Double layers protective film on the top
- Package Included:1pc Tele Pickguard
With so many choices, making the right decision on a squier jagmaster pickguard can be tough. But our reviews are here to assist you in your search for squier jagmaster pickguard perfect! If we’ve been able to help simplify things, then consider spreading some love and sharing this article – it’ll give us that extra bit of motivation as we continue striving towards reviewing all products out there!