In this article, we’ll be looking at each of these rme ucx in detail. This website collects data from 88407 different reviews to give you an idea of which rme ucx is really the best. We’ll discuss their features, prices, and other important information to help you decide which one is right for you. So without any further delay, let’s take a look at the best rme ucx in 2024.
Top-rated Rme Ucx Comparison 2024
- CONVENIENT: Easily control the device from the front panel and enjoy access to every feature
- HIGH-QUALITY: Includes 40-channels and an integrated digital recorder to directly play back your jam sessions
- DEPENDABLE: Enables you to completely replace an external mixer and create multiple latency-free monitor mixes with EQ, Dynamics, and Reverb
- PREMIUM CONSTRUCTION: Features line-level outputs that are DC-coupled with CV and Gate Voltage control
- ACCURATE: Capable of transferring analog and digital audio data to Windows and Mac computers
- +19 / +4 dBu switch on the bottom adds a direct way to reduce the output level, thus improves SNR for sensitive active monitors, avoids distortion / overload, and helps to keep TotalMix FX faders near 0 dB instead of high attenuations.
- Full SteadyClock FS circuit as in the ADI-2 Pro FS for lowest jitter and highest jitter immunity.
- 3. 5 mm TRS phones output power rises from 70 mW to 90 mW. THD of both phones outputs improved by up to 10 dB. Uses same output op-amps as ADI-2 Pro now. Output impedance of 3. 5 mm TRS lowered from 2 Ohms to 0. 1 Ohms.
- Mic inputs SNR improved from 112. 2 dB to 113. 7 dB, TRS Line inputs SNR improved from 114 dB to 116. 3 dB (120 dBA). THD Line inputs improved by 8 dB.
- 6 samples less latency on the AD side by new ADC (5 samples AD, 7 samples DA. It won't get quicker. . . ).
- Top-shelf AD/DA converters, optimized analog circuits, and impressive SNR deliver crystal clear, transparent audio
- Analog, ADAT, AES, S/PDIF, and USB 2 connectivity integrates into any production environment
- 4 Pad-free mic circuits yield +18dBu of maximum input level and 75dB of gain
- Low impedance, high power headphone outputs provide superior monitoring
- Integrates with RME’s optional ARC USB remote controller
- This 12V high-quality replacement power adapter is compatible with the RME Babyface Pro, Babyface Pro FS, Fireface UCX, Cardbus Audio Interface.
- The plug fits a US 2-pin wall power socket.
- This power adaptor is designed to meet the power specification of the Babyface Pro, Babyface Pro FS, Fireface UCX, Cardbus Audio Interface referred to here - it is the correct voltage, amperage and tip size.
- It meets and exceeds all US safety standard, features overvoltage, overcurrent and short circuit protection to protect your device, and is energy efficient.
- The most versatile DAC available, the ADI2DACFS provides balanced/unbalanced analog I/Os, extreme power headphone output, a low noise in-ear-monitor output, SteadyClock FS, class-compliant USB compatibility, and same rates up to 768 kHz
- Developed by RME engineers, the updated ADI-2 DAC uses ESS's ES9028Q2M in a particular circuit variant that allows the chip to perform with professional-level quality
- The ADI-2 DAC FS allows those who use in-ear-monitors to receive the full dynamic range on playback, and its ground noise floor is 10dB lower than the one of the Extreme Power output
- When AutoDark is activated, the display, function keys, volume knob, and the standby button go off after 10 seconds of no user operation while touching any button or control will turn on all lights for 10 seconds
- Included is a new extended multi-remote support that has clearly labeled buttons for accessibility in any lighting situation
- Multiple Channels: The RME Fireface UFX III is the center of any multitrack studio, handling up to 94 channels I/O with ease
- ARC USB Remote Control: The optional available ARC USB connects to your computer via USB, and talks to TotalMix FX directly. It has 15 freely assignable and illuminated buttons, one encoder wheel, and a TS jack to connect a foot switch
- Inputs and Outputs: The front panel of the Fireface UFX III provides four high-performance XLR/TRS combo inputs for microphone, instrument, and line signals, two stereo headphone jacks with plus 19 dBu output level, MIDI I/O, and a USB port
- Modes: The Fireface UFX III operates in two different modes, driver-based USB 3 and Class Compliant. The Class Compliant mode is a standard that is natively supported by operating systems like Windows, Mac OSX, and Linux distributions
- TotalMix: UFX III comes with the TotalMix FX DSP mixer offering comprehensive routing and monitoring options, as well as the DIGICheck Analyzer which allows to measure and analyze the digital data feed in both directions with maximum precision
- This 9V high-quality replacement power adapter is compatible with the Sega Master System I, Master System II Game console.
- The plug fits a US 2-pin wall power socket.
- This power adaptor is designed to meet the power specification of the Master System I, Master System II Game console referred to here - it is the correct voltage, amperage and tip size.
- It meets and exceeds all US safety standard, features overvoltage, overcurrent and short circuit protection to protect your device, and is energy efficient.
- Compatible to: Multiface 2, Fireface 400, Fireface UC, Fireface UCX, QuadMic 2, MADIface XT, ADI-2, ADI-2 FS, ADI-2 Pro, ADI-2 Pro FS, ADI-2 Pro FS BE and AVB Tool
- Not compatible to: Multiface 1, Digiface, RPM, ADI-4 DD, ADI-2 DAC, ADI-2 Pro FS R Black Edition
- 4 x mic preamp inputs
- Quadmic II is battery powerable and thus excellent for remote applications
- A first choice for superior studio recordings
- Excellent signal/noise Ratio, lowest harmonic distortions and wide gain range
- 100 - 240V~
- 50/60 Hz
- 0,5 A
- Fit for MADIface XT, QuadMic II, Babyface Pro
- For Recording Studios and Touring
- 188-Channel I/O: 94 Inputs / 94 Outputs
- USB 3.0 Host Connection, DURec Support
- Selectable 48V Phantom Power
- Balanced 1/4" Line I/O, XLR 3-Pin Outs
- Replacement only, NOT Original but 100% Compatible Brand New High Quality Power Supply Adapter
- Please make sure that your model is listed in this listing, if your model is not listed here, please send us a question to confirm compatibility
- Input : 100V - 240V worldwide
- Over Voltage output Protection, Over Current output Protection. Short Circuit output Protection.
- Please don't confuse us with the low quality / low current ones in the market.
- Includes: 4 x Analog I/O, 2 x Phones Output, 1 x ADAT I/O, 1 x MIDI I/O, USB 2. 0, TotalMix FX, Class Compliant Mode, 2 x Line/Instrument Input
- High-end yet portable interface incorporates newly designed analog and digital circuits
- Energy saving technologies provide supreme fidelity with no compromises in level, noise or distortion.
- Created with the highest precision from a block of aluminum
- Replacement only, NOT Original but 100% Compatible Brand New High Quality Power Supply Adapter
- Please make sure that your model is listed in this listing, if your model is not listed here, please send us a question to confirm compatibility
- Input : 100V - 240V worldwide
- Over Voltage output Protection, Over Current output Protection. Short Circuit output Protection.
- Please don't confuse us with the low quality / low current ones in the market.
- Input : 100V - 240V worldwide
- Replacement: This Adapter is a Brand New Replacement One, Not Original
- Over Voltage output Protection, Over Current output Protection. Short Circuit output Protection.
- High Power exchange efficiency to control working temperature and stable working.
- Package include & Note:1 x Adapter Charger, Please make sure that you choose the right adapter before ordering.
- Input : 100V - 240V worldwide
- Replacement: This Adapter is a Brand New Replacement One, Not Original
- Over Voltage output Protection, Over Current output Protection. Short Circuit output Protection.
- High Power exchange efficiency to control working temperature and stable working.
- Package include & Note:1 x Adapter Charger, Please make sure that you choose the right adapter before ordering.
- Replacement only, NOT Original but 100% Compatible Brand New High Quality Power Supply Adapter
- Please make sure that your model is listed in this listing, if your model is not listed here, please send us a question to confirm compatibility
- Input : 100V - 240V worldwide
- Over Voltage output Protection, Over Current output Protection. Short Circuit output Protection.
- Please don't confuse us with the low quality / low current ones in the market.
- Input : 100V - 240V worldwide
- Replacement: This Adapter is a Brand New Replacement One, Not Original
- Over Voltage output Protection, Over Current output Protection. Short Circuit output Protection.
- High Power exchange efficiency to control working temperature and stable working.
- Package include & Note:1 x Adapter Charger, Please make sure that you choose the right adapter before ordering.
- Features high-grade quality analog inputs with the most commonly found analog signals in a control room, studio, or on stage
- Designed with a highly advanced solution for AVB networking, including eight streams in AM824 or AAF formats, for full control
- Control the state of your device directly from the front panel with an encoder and buttons for convenient, direct access to all features with plug’n’play for rapid user interaction
- Custom built with digital clocking for an excellent performance in all clock modes and high quality analog conversion to hear your mix crystal clear
- Includes a USB 2.0 port with the ability to remote control the device via a web-interface on any network link (including wirelessly over Wi-Fi)
With so many choices, making the right decision on a rme ucx can be tough. But our reviews are here to assist you in your search for rme ucx perfect! If we’ve been able to help simplify things, then consider spreading some love and sharing this article – it’ll give us that extra bit of motivation as we continue striving towards reviewing all products out there!