In this article, we’ll be looking at each of these bass breaker fender in detail. This website collects data from 96255 different reviews to give you an idea of which bass breaker fender is really the best. We’ll discuss their features, prices, and other important information to help you decide which one is right for you. So without any further delay, let’s take a look at the best bass breaker fender in 2024.
Top-rated Bass Breaker Fender Comparison 2024
- Hand orientation: Ambidextrous
- 1. 8” color display
- Ported wooden cabinet
- Single 8” bass speaker
- One ‘60s Mustang bass split-coil pickup
- “Mid ‘60s Mustang C”-shaped Maple neck; 7. 25”-Radius Fingerboard with 19 vintage-style Frets
- Alder Body
- 4-Saddle Bridge with threaded saddles; vintage-style tuning machines
- Includes deluxe Gig Bag
- Officially Licensed Fender Apparel
- 20FEND00034A-002
- Lightweight, Classic fit, Double-needle sleeve and bottom hem
- Set of four bass tuning machine bushings
- .825" outside diameter, .555" inside diameter, .353" height
- Fits standard and Deluxe Series (Mexico), and American Special (US) basses manufactured from 2001-Present
- Genuine Fender tuning key bushings
- Made for Fender and used on a variety of vintage and contemporary models
- Black nylon tapewound bass strings are soft on your fingers, long-lasting and very warm tonally
- Ideal for a fretless bass. The flat nylon wrapping saves your fretless fingerboard from the wear caused by roundwound strings
- Warm, jazzy tone for 34” scale instruments
- Ball-end design with classic Fender colors help make string changes a breeze and silk wraps at the tuner post help to protect the windings
- Made in the U.S.A.
- Fits genuine Fender American Standard Jazz Bass or Mexican Jazz Bass, for other Jazz bass style bass, you may need a modification for line up
- 10 mounting screw holes, without truss rod notch,no holes for thumb rest or pickup cover
- Plastic made, 2.0-2.2mm(0.08-0.09 inch) thickness
- Double layers protective films on the top
- Package included: 1 Piece Pickguard
- Set of four Pure Vintage nickel-plated stamped "clover-leaf" style open-gear tuning machines with mounting screws and bushings Fender stamped onto each tuning machine plate
- Tuning machine shafts approximately .55-Inch tall
- Fits most '70s-era basses will not retrofit to American Standard or American Deluxe basses
- Audio CD – Audiobook
- English (Publication Language)
- 05/30/1995 (Publication Date) - Capitol (Publisher)
- Classic fit
- Screen-printed "Since 1954" graphic
- 50/50 cotton/polyester
- Machine wash cold, dry on low heat
- Tight speaker response and vocal character via the 2 - 12 inch Celestion V-Type speakers
- Two 12 inch 8 Ohm Celestion V-Type speakers wired in series for a 16 ohm total cabinet impedance ratted to handle 140 watts
- Fits neatly under the Bass breaker 45 Combo/Head or Bass breaker 18/30 combo
- Durable meets dark with the bold gray lacquered tweed, black grille clothe grille and white stitched black leatherette wide handle
- Limited Warranty Included
- Fits American Precision Bass, American Standard and Mexico Standard models (after 1970s). Will not fit Squier, 5-string Precision Bass.
- 13 holes mounting pickguards without truss rod notch. No holes for thumb rest or pickup cover.
- 3ply Black/White/Black
- Back foiled, PVC material, 0.09 inch (2.2MM) thickness
- Package included: 1 x Bass Pickguard
- 3 distinct tonal timbres and overdrive levels via the Gain Structure switch
- Aggressive midrange character and crunch via the EL 84 power 3 12AX7 pre amp tubes
- Recording in any studio is easy as no microphone necessary with the recording-friendly Power Amp Mute, Switchable
- Set of four vintage-style chrome-plated tuning machines
- Includes bushings and mounting screws
- For Highway One, American Special, American Deluxe, Blacktop and Standard series basses
- Fits a variety of 4 string Jazz Bass models: American, American Standard, American Vintage, Standard and Deluxe series Jazz Bass models (does not fit 5 string models)
- 10 mounting screw holes, with truss-rod notch.No screw holes for vintage style thumb rest or pickup cover
- 3ply plastic made, 2.0-2.2mm(0.08-0.09 inch) thickness
- Double layers protective films on the top, while using please remove it
- Package includes: 1Pc Bass Pickguard
- 100% designed by Fender
- Inspired by 1960s-era Mustang Bass models
- Fender-Designed alnico pickups
- Vintage-tint gloss neck finish
- 30" scale length
- Brass control plate with chrome plating
- Mounting screws included
- Fits most Jazz Bass models (US and Mexico) manufactured from '64-Present
- Country of Origin: United States
- Black polyester with an embroidered Fender logo
- Designed to fit Fender Rumble 100
- Height: 18.37"
- Width: 17"
- Depth: 14.25"
- Genuine Fender Replacement Part
- High Quality
- Durable
- Country of Origin: United States
- Lightweight, Windproof, Comfortable.
- FULL ZIPPER: The zipper head is on the left.
- DESIGN: Mens Light jacket with ribbed knit stand-up collar; Classic rib knit hem and cuffs for comfortable fit.
- MULTI-POCKETS: 2 side hand pockets,1 zippered pocket, 2 utility pockets on left sleeve and 1 deep inner pocket.
- OCCASIONS: This lightweight jackets perfects for daily wear or outdoor activity, such as business casual, street fashion, party, travel, etc; Suitable for spring fall and winter.
- American Standard/Deluxe Bass Tuners
- Right-handed set
- Chrome
With so many choices, making the right decision on a bass breaker fender can be tough. But our reviews are here to assist you in your search for bass breaker fender perfect! If we’ve been able to help simplify things, then consider spreading some love and sharing this article – it’ll give us that extra bit of motivation as we continue striving towards reviewing all products out there!