Top 10 Best Walrus Audio Mako D1 Reviews & Comparison | Updated

In this article, we’ll be looking at each of these walrus audio mako d1 in detail. This website collects data from 3354 different reviews to give you an idea of which walrus audio mako d1 is really the best. We’ll discuss their features, prices, and other important information to help you decide which one is right for you. So without any further delay, let’s take a look at the best walrus audio mako d1 in 2024.

Top-rated Walrus Audio Mako D1 Comparison 2024

SaleBestseller No. 1
Walrus Audio Mako Series D1 V2 High Fidelity Delay Pedal 900-1051V2 Silver
  • Retooled the Reverse program for a stronger effect
  • Retooled the Vintage program to emulate a tape delay
  • Replaced bit crusher effect on the Digital program with overdrive
  • Added stereo width control allows two widening types – Panning and Haas Stereo Effect
SaleBestseller No. 2
Walrus Audio MAKO Series D1 High-Fidelity Stereo Delay Pedal (900-1051)
  • Powerful multi-function delay with five, studio grade, high-fidelity, custom tuned programs: Digital, Mod, Vintage, Dual and Reverse
  • Each program can be tuned and tweaked with modulation, tone, age, and subdivisions
  • The attack knob adds another dynamic to each program, opening up a new world for creating soundscapes
  • The D1 boasts stereo in and out, midi control and on-board presets
  • Power requirements are 9VDC (300mA minimum). The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended. Power supply not included.
SaleBestseller No. 3
Walrus Audio MAKO Series R1 High-Fidelity Stereo Reverb (900-1056)
  • Extremely powerful and versatile multi-function reverb
  • Can quickly go from small intimate room sounds to massive washes of experimental euphoria with six customized, studio-quality programs - Spring, Hall, Plate, BFR, RFRCT (Refract), and Air
  • Every program can be tuned and tweaked and then saved to one of nine on-board presets
  • Boasts a volume swell effect that can be applied to any program, sustain and latching momentary features, stereo in and out, MIDI control
  • Players of all styles and genres will be able to find eternal inspiration with the R1
SaleBestseller No. 4
Walrus Audio MAKO Series M1 High Fidelity Modulation Machine, Blue (900-1063)
  • A powerful multi-function modulation machine with six customized, studio-quality programs: Chorus, Phaser, Tremolo, Vibe, Rotary, and Filter
  • Each program has a wealth of options to tune, tweak, customize and then save to one of nine onboard presets
  • A sound explorers delight, the M1 features a dedicated lo-fi knob allowing you to mix various lo-fi parameters to every program
  • Add subtle movement and texture to float under your playing or make a massive statement with a thick swirling chorus to choppy panning tremolo
  • Write your sonic story in any style and genre with the M1 High-Fidelity Modulation Machine
SaleBestseller No. 5
Walrus Audio MAKO Series ACS1 Amp and Cab Simulator (900-1057)
  • Delivers vintage amplifier and custom speaker cabinets that can be mixed and matched in left and right channels
  • Easily dial in completely separate amps, cabs, EQ, gain and room reverb and save your favorite tones with 1 of 3 on-board presets (128 via MIDI)
  • Holds six high-quality cabinet impulse responses (IRs); Use the ABC Cab toggle switch to select your cab preference
  • Simulate the size of the room that your amp and cabinet are in. At zero, it would resemble tracking your amp in an isolated environment with no reverb. At max would emulate a natural-sounding, large studio environment.
  • Boost feature allows you to quickly jump to a preset level of volume and/or gain
SaleBestseller No. 6
Walrus Audio 385 Overdrive mkII, Black
  • An A/B switch has been added giving the pedal two separate sets of volume and gain. Use it like a preset to change the volume and/or gain for specific parts!
  • The 385+ Switch adds an additional gain stage at the front of the pedal for thick, saturated overdrive with more sustain.
  • Soft touch, relay true-bypass switch.
  • Top mount in/out jacks.
SaleBestseller No. 7
Walrus Audio Fundamental Series Overdrive (900-1076)
  • Controls: Gain, Tone, Volume
  • Modes: Smooth, Crunch, Bright
  • Power Requirements: 100mA minimum
Bestseller No. 8
Walrus Audio Fable Granular Soundscape Generator (900-1080)
  • The Fable gives you five all-new programs centered around sample and chop delay algorithms to create bizarrely beautiful networks of sampled and resampled sounds
  • The Fable uses a powerful dual DSP architecture to combine delay programs in series with granular sampling algorithms, each with its own analog feedback path
  • Find unique soundscapes ranging from smooth, flowing ambience; to bizarre, organic reverberance; to chaotic, glitchy swarms
  • Dimensions: 3.62” x 4.79” x 2.25” including knobs
  • 9VDC, center negative (300mA minimum). The use of an isolated power supply is recommended
SaleBestseller No. 9
Walrus Audio Melee Wall of Noise Reverb Distortion (900-1069)
  • Uses a joystick to meld reverb and distortion into one massive blaze of sound
  • Can run one of three different reverb programs Ambient, Octave, and Reverse
  • Press and hold the sustain switch to ramp up the reverb trails
  • Coated in a glossy neon pink enclosure with white, yellow, and green inks with art by David Hüttner
  • Power supply not included
Bestseller No. 10
Walrus Audio ARP-87 Multi-Function Delay Pedal - Kamakura Series
  • Multi-function Guitar Delay Pedal with Digital
  • Tap Tempo - Kamakura Series
  • Trails/No-trails Modes
  • Momentary Functions
  • Slap Settings
Bestseller No. 11
Walrus Audio Badwater Bass Preamp DI (900-1066)
  • Versatile and powerful tone sculpting tool for bassists of all styles
  • Optical comp for smooth added sustain
  • Blend-able drive control with three different voicing options
  • Boost/Cut EQ section. +/- 12dB on low and high controls and +/- 10dB on Mid, LMF, and HMF controls
  • Sweep 500 Hz to 2.4kHz through the Low Mid & LMF controls and 3.5kHz to 7.5k Hz on High Mid & HMF controls
SaleBestseller No. 12
Walrus Audio 385 Overdrive Guitar Effects Pedal
  • Matte black finish with yellow ink featuring original artwork of a vintage Belle and Howell 385 projector
  • Dynamic, responsive, tube-like, and amp-like
  • The user is able to boost and cut bass and treble, allowing them to be creative with mid-frequency scoops and bumps
  • The pedal is internally running at 18v, which helps us nail the same dynamic feel of the amp in a stomp box
  • Power requirements are 9VDC (100mA minimum)
SaleBestseller No. 13
Walrus Audio Emissary Parallel Boost Guitar Effects Pedal
  • 2-In-1 boost that helps make leads stand out, slides sing, finger picking come to life and pushes tube amps into great natural breakup
  • The top knob controls the volume for the “bright” boost circuit: a clean, high headroom jfet boost, with a slight emphasis on higher frequencies to liven up your tone
  • The bottom knob controls the volume for the “mid” boost circuit: features a targeted boost at either 1kHz or 800Hz selected by the toggle switch
  • The bypass switch also features a momentary function; when the bypass switch is in off position, press and hold to temporarily Activate the effect; releasing the switch turns the effect off
  • “Silk satin black” finish with light Blue and white ink. Artwork by illustrator Adam Forster features an x-ray of a patients Skull viewing the emissary and other vital veins running through the head
SaleBestseller No. 14
Walrus Audio ERAS Five-State Distortion (900-1061)
  • Eras is a no apologies, high-gain distortion that’s ready to chug, shred, and palm mute with tight response and multiple distortion textures
  • Use the Blend knob at max for a full distortion onslaught or roll back the Blend knob to creatively stack and mix other dirt pedals placed in front of Eras
  • Great for bassists that want to blend in their dry signal as well
  • Features a five-position rotary knob. Think of each position as a different “flavor” of the pedal. Blend in dry signal or other pedals in combination with the gain states for a near-infinite amount of distortion sounds.
  • Power requirements are 9VDC, center negative (100mA minimum)
Bestseller No. 15
Walrus Audio EB-10 Preamp/EQ/Boost, Cream, (900-1049C)
  • Works as a preamp, EQ and boost with three presets to meticulously craft your sound allowing for studio-grade guitar tone in a live setting
  • Each rotary knob offers up to 12dB of boost OR cut of Low, Mid, and High frequencies, based on where you have the toggle switches set
  • When the Boost switch is engaged, add a 10dB MOSFET boost for some great extra punch
  • Use the EB-10 to compensate when switching between low and high output instruments
  • Push solos through the mix, or use the presets as three different gain stages by using combos of increasing boosted EQ settings and the Boost switch
Bestseller No. 16
Walrus Audio Julia V2 Analog Chorus/Vibrato, Red (Gear Hero Exclusive)
  • Power supply not included. Exact size of the diecast enclosure is 4.77” x 2.9” x 2.3”. Power requirements are 9VDC (30mA minimum).
  • RATE – The Rate knob allows you to set the speed at which the LFO sweeps. From little to no movement at lower settings, to wild wackiness at max.
  • DEPTH – The Depth knob allows you to change the amplitude of the LFO. From no movement to deep sweeping modulation.
  • LAG – The Lag knob lets you set the center delay time that the LFO modulates around. From smooth tight modulation at lower settings, to noisy nauseating detune at maximum, the Lag knob adds a new dimension to the traditional Chorus/Vibrato landscape.
  • WAVE SWITCH – The Wave switch lets you select either sine or triangle LFO waveforms. The sharper corners of the triangle wave generally sound more appealing for chorus type effects, and the more round shape of the sine wave generally sound better with vibrato type effects.
Bestseller No. 17
Walrus Audio Phoenix 15 Output Power Supply, Purple/Seafoam (Gear Hero Exclusive)
  • Isolated power supply for super clean tones, This unit comes with 15 – 2.1mm barrel black power cables, 2 – 2.5mm to 2.1mm and a detachable IEC Cable.
  • Four isolated 300mA outputs, that has to power to run the larger units
  • Three outputs include a toggle option to run 9V or 12V
  • The Phoenix fits under most pedal boards such as the PedalTrain PT-2 and up.
  • Gear Hero HQ Exclusive Purple
SaleBestseller No. 18
Walrus Audio Ages Five-State Overdrive (900-1052)
  • I. Low-gain mode with symmetric silicon soft clipping. Compressed and smooth.
  • II. Low-gain mode with symmetric LED soft clipping. Pushed, open, and sparkly.
  • III. High-gain mode with symmetric silicon soft clipping. Increased saturation and tight.
  • IV. High-gain mode with symmetric LED soft clipping. Saturated, punchy and big.
  • V. High-gain mode with symmetric silicon hard clipping. Heavy compression, thick and chewy.
Bestseller No. 19
Walrus Audio Slö Multi Texture Reverb Guitar Effects Pedal, Standard (900-1047)
  • Allows players to create lush, modulated, sleepy and ambient soundscapes
  • Dark – add a lower octave to your reverb trail. Here you'll create deep and wide atmospheric sounds and channel nightmarish soundscapes. X knob sets the level of a -1 octave signal that feeds the reverb
  • Rise – this is an auto-swell reverb for beautiful cinematic swells. Don't rush it. Let it breathe and gently wake up. X knob sets the amount of time It takes the reverb to swell in after a note is played. Set Lower for shorter rise times and higher for longer rise times
  • Dream – here is a lush reverb with a latching pad function. Press the sustain switch to latch signal. Experiment with the X knob to add Vibrato over the pad. Press sustain again and pad will decrescendo according to where decay knob is set. X knob sets the depth of Vibrato applied to the reverb trail
  • Lollipop Blue finish with light Blue and off white ink featuring original artwork by christi DU toit
Bestseller No. 20
Walrus Audio Phoenix 15 Output Power Supply, Limited Edition White and Blue
  • Gear Hero HQ Exclusive Limited Edition White
  • Isolated power supply for super clean tones, This unit comes with 15 – 2.1mm barrel black power cables, 2 – 2.5mm to 2.1mm and a detachable IEC Cable.
  • Four isolated 300mA outputs, that has to power to run the larger Strymon units like the BigSky and TimeLine.
  • Three outputs include a toggle option to run 9V or 12V
  • The Phoenix fits under most pedal boards such as the PedalTrain PT-2 and up.

With so many choices, making the right decision on a walrus audio mako d1 can be tough. But our reviews are here to assist you in your search for walrus audio mako d1 perfect! If we’ve been able to help simplify things, then consider spreading some love and sharing this article – it’ll give us that extra bit of motivation as we continue striving towards reviewing all products out there!

Leave a Comment