In this article, we’ll be looking at each of these skb mixer rack case in detail. This website collects data from 32035 different reviews to give you an idea of which skb mixer rack case is really the best. We’ll discuss their features, prices, and other important information to help you decide which one is right for you. So without any further delay, let’s take a look at the best skb mixer rack case in 2023.
Top-rated Skb Mixer Rack Case Comparison 2023
SaleBestseller No. 1
SKB Cases 1SKB-R102 10x2 Roto Rack/Mixer Console, 10U Slanted Rackmount on top, 2U rackmount in front, Steel Threaded Rails, Hard Lid and Doors, Side Access Ports for Cable Routing
- 10U Slanted rack mount on top
- 2U rack mount in front
- Steel threaded Rails, hard lid and doors
- Side access ports for cable routing
- Stackable for storage and transport
Bestseller No. 2
SKB Cases 1SKB-R100 Roto-molded 10U Top Mixer Rack, teel Threaded Rails, Hard Lid and Removable Back Door, (2) Carrying Handles
- Roto-molded of LMDP Linear Medium Density Polyethylene
- 10U Slanted rackmount
- Steel threaded rails
- Hard lid and removable back door
- (2) Side access ports for cable routing
Bestseller No. 3
SKB 6U iSeries Injection Molded Fly Rack-13 Mixer Accessory (3i-2317M146U)
- SKB series Injection molded mil-standard waterproof cases are molded of Ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-C-4150J/ IP67). limited Lifetime
- Standard features include a molded-in hinge, patented trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), and resistance to UV, solvent, corrosion, and impact damage (MIL-STD-810F)
- 6U removable Injection molded shock Rack cage, 13 inch rack depth, interior foam protection, Ultra high-strength polypropylene copolymer resin case construction, UV, solvent, corrosion and resistant (MIL-STD-810F)
- Complete Gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J), automatic ambient pressure equalization value (MIL-STD-648C & IP67)
- Molded-in hinges, TSA acceptable trigger release latch system, rubber over-molded cushion grip handles, locking loops to accommodate a customer supplied lock
Bestseller No. 4
SKB Cases 1SKB19-R1400 Rotomolded GigSafe, 14U rack for deeper rackmount mixers, Greater vertical mixer depth, Oversized side handles for easier handling
- 14U rack for deeper rackmount mixers
- Oversized side handles for easier handling
- Accommodates the AV-14 retractable shelf
- Attaches to the SKB19-REX6 Expander case
- Attaches to the SKB19-R3224 GigDolly
Bestseller No. 5
SKB Gig Safe. Roto-Molded 14U slanted, mixer case. Can mount to SKB19-REX6
- 14U rack for deeper rack mount mixers Greater vertical mixer depth oversized side handles for easier handling.
Bestseller No. 6
SKB 4U iSeries Injection Molded Fly Rack-13 Mixer Accessory (3i-2217M124U)
- SKB iSeries Injection molded mil-standard waterproof cases are molded of Ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-C-4150J/ IP67). limited Lifetime
- Standard features include a molded-in hinge, patented trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), and resistance to UV, solvent, corrosion, and impact damage (MIL-STD-810F)
- 4U removable Injection molded shock Rack cage, 13 inch rack depth, interior foam protection, Ultra high-strength polypropylene copolymer resin case construction, UV, solvent, corrosion and resistant (MIL-STD-810F)
- Complete Gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J), automatic ambient pressure equalization value (MIL-STD-648C & IP67)
- Molded-in hinges, TSA acceptable trigger release latch system, rubber over-molded cushion grip handles, locking loops to accommodate a customer supplied lock
Bestseller No. 7
SKB 3i-231714WMC 4U iSeries Injection Molded Wireless Mic Fly Rack (3i231714WMC)
- 4U removable injection molded shock rack cage
- Custom-cut foam to accommodate four wireless hand held transmitters and four body pack transmitters
- Under 62 linear inches (non-oversized luggage)
- Built-in wheels and pull handle
- TSA Acceptable trigger release latch system
Bestseller No. 8
SKB Component Rack, Black (1SKB-ISF2U)
- Compact carry-on size - Lighter & stronger than previous models
- Waterproof & impact-resistant
- Innovative molded-in front/rear rack Rails
- 1. 26" Front rack RAIL to front door depth, . 75" Rear rack RAIL to rear door depth
- Quiet-glide wheels & pull handle. Made in the USA!
Bestseller No. 9
SKB Injection Molded 4U ISeries Studio Flyer Rack Case with Handle and Wheels
- Laptop Case with Retractable Pull Handle
- 4U Waterproof Rolling Rack
- Inline Wheels
Bestseller No. 10
SKB 1SKB-R104W 10 x 4 Compact Rolling Rig (1SKBR104W)
- Demo 10U/4U Mixer Rack w/Whl
Bestseller No. 11
SKB 8U Roto Rolling Rack (1SKB-R8UW)
- Roto molded of Linear Low Density Polyethylene (LLDPE) for maximum strength & impact resistance
- Available in 4U, 6U, & 8U sizes
- Interlocking molded stacking bars
- Gasket-sealed waterproof front & rear lids
- Recessed twist latches
Bestseller No. 12
SKB 6U Roto Rolling Rack (1SKB-R6UW)
- 6U Roto-molded Rack Case with 17.6" Rackable Depth
- Mil-Spec Butterfly Latches
- Front Rear Rack Rails
- Retractable Pull Hle
- Inline Wheels
Bestseller No. 13
SKB 4U Roto Rolling Rack (1SKB-R4UW)
- Roto molded of Linear Low Density Polyethylene (LLDPE) for maximum strength & impact resistance
- Available in 4U, 6U, & 8U sizes
- Interlocking molded stacking bars
- Gasket-sealed waterproof front & rear lids
- Recessed twist latches
Bestseller No. 14
SKB 1SKB-R102W 10 x 2 Compact Rolling Rig (1SKBR102W)
- Rotationally molded of Linear Medium Density Polyethylene (LMDPE) for maximum impact resistance
- 10U, 7-degree angled top threaded steel rails for secure mounting of popular mixers/DJ controllers
- Top and doors are injection molded
- 2U threaded vertical steel rails on front
- Two removable side access plugs
Bestseller No. 15
Gator Cases Pro Series Rotationally Molded 4U Rack Case with Standard 19" Depth; Made in USA (G-PRO-4U-19), Black
- Heavy-Duty Rack Case Made from Indestructible Roto Molded Polyethylene Plastic (Updated 2018 Design)
- 19" Rackable Depth / 4U Rack Size (7"). Interior Dimensions: L 17 x W 19 x H 7 in Inches
- Penn-Elcom MOL Recessed Twist Latches with Black Powder Coated Finish
- Front and Rear Removable Lids with Molded-in, Ergonomic Side Carry Handles
- Made in the USA from Recycled Plastic
Bestseller No. 16
SKB Cases 1SKB-R106W Compact 10x6 Rolling Rig, Rotationally Molded of Linear Medium Density Polyethylene (LMDPE) for Maximum Impact Resistance, Top and Doors Are Injection Molde
- Rotationally molded of Linear Medium Density Polyethylene (LMDPE) for maximum impact resistance
- 10U, 7-degree angled top threaded steel rails for secure mounting of popular mixers/DJ controllers
- Top and doors are injection molded
- 6U threaded vertical steel rails on front
- 2 removable side access plugs
SaleBestseller No. 17
SKB Roto-Molded 3U Shallow Rack (1SKB-R3S)
- Roto-molded of Linear Low Density Polyethylene (LLDPE) for maximum strength & impact resistance
- Available in 2U, 3U, 4U, and 6U sizes
- Interlocking molded stacking bars
- Gasket-sealed waterproof front & rear lids
- Recessed twist latches
Bestseller No. 18
SKB 19" AV shelf for 8U+ slant top racks
- The mounting surface is 17" x 11". The 1SKB-AV8 was designed to work with any slant rack that is 8U or longer and has a slant in the 6-8 degree range, however, there is no guarantee that the lid for your case will fit over the 1SKB-AV8 (except when used with the 1SKB-R102/4/6).
- When mounting to a slant rack other than the 1SKB-R102/4/6, the 1SKB-AV8 is ~3.375" high when folded down (when measured from the top of the rail to the retaining lip on the front of the 1SKB-AV8's mounting surface).
- When folded down, the AV8 requires 13 3/4" clearance from back to front.
Bestseller No. 19
SKB 3i-2011M103U iSeries 3U Shallow Fly Rack Case - 9"
- Hard Case with Removable Shock Rack Cage
Bestseller No. 20
SKB 12U Roto Rack (1SKB-R12U)
- Roto molded of Linear Low Density Polyethylene (LLDPE) for maximum strength & impact resistance
- Available in 2U, 3U, 4U, 6U, 8U, 10U, and 12U sizes
- Interlocking molded stacking bars
- Gasket-sealed waterproof front & rear lids
- Recessed twist latches
With so many choices, making the right decision on a skb mixer rack case can be tough. But our reviews are here to assist you in your search for skb mixer rack case perfect! If we’ve been able to help simplify things, then consider spreading some love and sharing this article – it’ll give us that extra bit of motivation as we continue striving towards reviewing all products out there!