In this article, we’ll be looking at each of these hartke 3500 bass amp in detail. This website collects data from 44916 different reviews to give you an idea of which hartke 3500 bass amp is really the best. We’ll discuss their features, prices, and other important information to help you decide which one is right for you. So without any further delay, let’s take a look at the best hartke 3500 bass amp in 2023.
Top-rated Hartke 3500 Bass Amp Comparison 2023
- Power: 350 watts at 4 ohms, 250 watts at 8 ohms
- Selectable tube and solid-state preamps
- Active and passive inputs, Balanced XLR direct output
- Rotary bass and treble contour controls
- 10-band graphic EQ, Rack Ears included
- 15 watts of output power
- 6.5" HyDrive paper and aluminum cone driver
- Top-mounted amplifier with Volume, Bass, Mid and Treble controls
- Dual Parallel Mode: 2 x 225 watts @ 8 ohms, 2 x 320 watts @ 4 ohms, 2 x 545 watts @ 2 ohms, Bridge Mode: 1 x 750 watts @ 8 ohms, 1 x 1100 watts @ 4 ohms
- Bass and Treble Shelving, plus mid-peak EQ controls, Selectable brite switch for added high frequency response, Selectable limiter switch with LED indicator
- Classic 12AX7 High Voltage Class-A tube preamp circuit, Balance control blends level of A and B outputs
- Front panel XLR balanced direct output, Rear panel 1/4-Inch effects loop
- 1/4-Inch plus Speakon output connectors, Two-rackspace metal chassis with steel faceplate and handles
- 4x10" Sealed Bass Cabinet
- 1,000-watt
- 8-ohm
- 500W Bass Head with Tube Preamp
- Class D Output Section
- XLR Direct Out
- FX Loop
- 3-b EQ
- 400W RMS/ 8 ohm
- 10" Proprietary aluminum cones (100W each)
- 1.5" Voice coils on Kapton formers
- Frequency response: 30hz-5khz
- 2 x 1/4" (Wired in parallel) inputs
- 800W Bass Head with Tube Preamp
- Class D Output Section
- 2 Footswitch Jacks
- XLR Direct Out
- FX Loop
- The Fender Rumble 500 V3 Bass Amplifier features 500 watts but is lighter and louder than ever (only 36.5 pounds!)
- The Class D power amp and dual 10 inch Eminence speakers pump 500 watts of robust, crystal clear tone
- An overdrive circuit can be controlled manually or with optional footswitch
- This bass rig features a rear-panel XLR line output with ground lift switch, allowing for compatibility across stage and studio performance
- 2 Year Limited Warranty: Fender amplifiers are designed for players and built with unmatched quality, down to the last screw—Fender warrants this amplifier to be free from defects in materials and workmanship for two (2) years from original purchase
- Package Dimensions: 27.25" (L) x 25.5" (W) x 17.25" (H)
- Package Quantity: 1
- Product Type: Sound And Recording Equipment
- Country Of Origin: China
- Variable Bass Boost
- 1x12" Vented Bass Cabinet
- 300-watt
- 4/8-ohm
- Package Weight: 20.049 kilograms
- 1 x 12" HyDrive speaker + 1" HF / Lightweight Cabinet - 24.8 lb / 300 watts / 4 or 8 ohms
- Model No: HCHL112
- Package dimensions: 21.75 L x 17.5 W x 19.0 H (inches)
- item package weight: 38.5 pounds
- Up to 200 watts of power
- 2 Premium 8 speakers
- DDT speaker protection
- Pre-gain control with TransTube gain boost
- Three-band EQ with Overdrive, Contour, Mid-Shift, Bright, and Kosmos-C switches
- Weighs only 3 lbs.
- 350 watts @ 4 ohms, 175 watts @ 8 ohms
- Balanced Output: XLR balanced output with pre/post EQ and ground lift switch
- One 1/4" input jack, compatible with all active and passive basses
- One Neutrik Speakon speaker output; Tuner out
- 500 Watts of power
- Four 8" Hydride paper/aluminum hybrid cone drivers
- Top-mounted control panel
- Hartke Shape EQ knob with variable filter
- 3-Band (bass, mid, Treble) EQ
- Lightweight Class D combo amplifier that weighs 35lb
- 500 watts of power
- Two 10" HyDrive paper/aluminum hybrid cone drivers
- 3-band (Bass, Mid, Treble) EQ
- Up to 100 watts of power
- Premium 10 speaker
- DDT speaker protection
- Pre-gain control with TransTube gain boost
- Three-band EQ with Overdrive, Contour, Mid-Shift, Bright, and Kosmos-C switches
- The Bass 15K with high efficiency and performance for sub-bass and bass responses
- This amplifier offers much more displacement control, through its SUBSONIC FILTER, volume control and LOW PASS, to get your bass just perfect.
- The recommended wire gauge for Positive / negative power supply cable is 2 x 2/0 AWG. For Output cables wire gauge is 7 AWG. For Remote Cable is 18 AWG and for protection fuse or circuit breaker is 650A
- The Bass 15K, has four internal ventilation fans, and cannot be blocked. For perfect functioning, the amplifier must be installed in a cool and aired place.
- Output Power @ 14.4 VDC: 1 Ohm: 15000 watts RMS / 2 Ohms: 8505 watts RMS. The frequency response (Full Range) 8Hz ~ 250Hz (-3dB).
- Maximum Power: @ 14.4 VDC - 1 Ohm: 3000 Watts RMS @ 14.4 VDC - 2 Ohm: 1920 Watts RMS.
- Crossover High Pass (HPF) 8Hz ~ 30Hz (-12dB/8ª) Variable
- Crossover Low Pass (LPF) 60Hz ~ 250KHz (-12dB/8ª) Variable
- Input Sensitivity: 220mV - Frequency Response: 8Hz ~ 250Hz (-3dB)
- Dimensions: (H X W X D) 9.41" x 2.87" x 8.58"- Weight: 6.51lb
- Package dimensions: 18.75 " L x 28.0 " W x 18.75 " H
- Package quantity: 1
- Product Type: Sound And Recording Equipment
- Country of Origin: China
With so many choices, making the right decision on a hartke 3500 bass amp can be tough. But our reviews are here to assist you in your search for hartke 3500 bass amp perfect! If we’ve been able to help simplify things, then consider spreading some love and sharing this article – it’ll give us that extra bit of motivation as we continue striving towards reviewing all products out there!